Welcome to the page all about GEAR! Gear is what keeps us safe on the rocks. You will learn to use it, love it and trust it, quite literally, with your life.
What is Gear?
Gear is pretty much any equipment you use when you go climbing, it includes your harness, shoes and chalk, as well as all the various bits of metalwork we use to protect climbs.
Gear varies depending on climbing style, which could be split into 3 categories:
The club has a decent collection of gear which we use whenever we go on trips. There are racks, ropes and harnesses for use outside, as well as a couple of bouldering mats. There are also harnesses and a lead rope for use at the wall.
- USMC Lead Rack 1
- USMC Lead Rack 2
- USMC Lead Rack 3
- USMC Lead Rack 4
- USMC Sport Rack
- Club Ropes
- Bouldering Mats
"What is a rack?" I hear you ask. A rack is a big collection of climbing gear for use when leading, either Sport or Trad. It consists of tens of different pieces of gear, usually all neatly attached to a short piece of rope (tat).
The contents of a rack varies, depending on personal preference, funds, and how difficult you are likely to be climbing with it. Regardless of this, the basic building blocks are the same:
The screw-gate is a climbing mainstay, it is versatile, strong, and secure. A screw-gate is like a normal snap-gate except is usually a little bigger and has a screw on the gate (...it's in the name). The screw, when done up, ensures that the carabiner cannot accidentally open, letting go of whatever it was attached to. For this reason, screw-gates are used wherever you need to connect two other bits of gear together without the risk of it possibly coming undone. For instance, when belaying, a screw-gate is used to hold your #Belay Device to your harness. Whenever you use a screw-gate, ALWAYS make sure the screw is done up, and preferably not rubbing on anything which might make it work its way open.
IMAGE The snap-gate is your bog-standard carabiner. It has a spring loaded gate which will snap shut when you let go. Snap-gates are used whenever the added security of a screw-gate is not required. For instance as part of #Quick-Draws. Other uses include holding gear to your harness (Racking-Up), attaching your shoes to your bag, key-rings...
IMAGE Quick-Draws are essentially two Snap-Gates with a short bit of sling connecting them together. Quick-draws are used to hold a piece of placed/fixed gear to the rope. It is important to clip a quick-draw the right way round. Often the gates of the carabiners are colour-coded. If so, then as a general rule "Red to Rope." The other half is often blue, in which case "Blue to bolt" applies. If the gates are not colour coded, you may find that one is curved and one is straight. The curved one should always be clipped to the rope, and the straight one to the gear. You also need to be careful not to back-clip, but this is a concept which should be taught when you learn to lead.
Why does it matter which way I clip?
I'm glad you asked. If you imagine you are leading a route, and unfortunately you fall off (or just sit on the rope for a rest). You are putting weight on whatever your last piece of gear was, usually a quick-draw attached to something metal. The carabiner on the quick-draw which is attached to the metal gear may well get a little dented or scratched as a result of the force you are putting on it. This is not usually a problem as far as the carabiner itself is concerned, but we have to consider what happens next time the quick-draw is used.
Imagine I am now climbing another route, using the quick-draw you just fell on, and I clip it the other way round. This time, the end that was attached to the metal in your case, is attached to my rope. This means any dents or scratches are rubbing on my rope and may cause damage. Damage to ropes, as you can imagine, is a bad thing. That is why you need to be consistent in the way you clip.
Extenders are basically big Quick-Draws. They will have an actual sling, attached between two [#Snap-Gate_Carabiner|snap-gates].